Hello all,
I recently started getting into photography. I purchased an Olympus Trip 35 and some Kodak Ultramax 400 to shoot on a trip to Greece for fun. Most of the photos were taken using the landscape focal setting, and all were taken using the auto setting for aperture size. I just had these developed at London Drugs as there aren't really any film labs near me besides this.
I notice most of my photos have a very hazy look to them, and I was wondering if this is because of how they were developed, the quality of the Trip 35's lens (or something wrong with my specific camera), or some user error on my end. The photos have not been edited by me with any software as I am just starting my delve into photography.
I understand that the Trip 35 is just a simple point and shoot camera, and Ultramax 400 may not be a quality film. When I compare my photos with other photos taken with the same camera it seems most photos are clearer?
Any tips, advice, or other comments are appreciated :)
https://preview.redd.it/591jsgojtg1d1.jpg?width=6048&format=pjpg&auto=webp&s=d77f133b742146c384b48bbd6aab47216f662165
https://preview.redd.it/2wnslccktg1d1.jpg?width=4011&format=pjpg&auto=webp&s=8a3e6551e02049c13d1c46476478a9ba8f6816b0
https://preview.redd.it/tklf0wsktg1d1.jpg?width=6048&format=pjpg&auto=webp&s=4912384caeb0d071b223a3f7ae6ba11399fc9c17
https://preview.redd.it/fwmm4h9ltg1d1.jpg?width=6048&format=pjpg&auto=webp&s=987943e6d73cdab8279726e6ece63eb21d62ba2c
https://preview.redd.it/p4jklznltg1d1.jpg?width=6048&format=pjpg&auto=webp&s=10dd38e4a1feb9eb846c1c64d59ad1398ae641f4
https://preview.redd.it/ukfvpdzmtg1d1.jpg?width=6048&format=pjpg&auto=webp&s=bfb23159b7dc310457f31598aca9d2fb2ef2c912

I made this because of the stuttering and lagging I've had on GTA because of CPU going 100%. If all of this doesn't work for you, change or repair your graphics card or CPU because these are all of the best settings that I found on the internet for optimum performance.
I'm based on this subreddit https://www.reddit.com/GrandTheftAutoV_PC/comments/43ilps/best_gta_5_settings_for_the_gtx_970_hands_down/ but as this one is old and also is from an nvidia card, this one is an update.
These settings can work for Singleplayer, GTA Online and FiveM, but I recommend you that if you're going online (GTA Online and FiveM) to turn down at least the Most Impactful settings I have listed on the bottom of the thread, because you'll need to.
https://preview.redd.it/uqys84g9jg1d1.png?width=1161&format=png&auto=webp&s=783daa978fc9b5b6d80b0ccaf47e402469c7c1b7

IMPORTANT: 1. To have the best performance set to Full screen and set the resolution as you wish or the monitor resolution - 2. Set refresh rate as you wish or the monitor hz rate - 3. MSAA Off (Trust me, on the fourth capture it explains why) - 4. Vsync On if you set refresh rate to 60, off if not

https://preview.redd.it/6jkjsz5kfg1d1.png?width=1161&format=png&auto=webp&s=af9f2140c0f44262a7dc7fc9af2c463f3d3d113a

IMPORTANT: 1. All sliders up (Can turn it down if needed) - 2. You can turn some of the qualities options down if your graphics card can't support it - 3. Reflection Quality doesn't make a change and consumes a lot of fps so off - 4. Soft Shadows to Softest or lower. If you want performance, don't set it to AMD's CHS or NVIDIA's PCSS

https://preview.redd.it/my9nluuqtg1d1.png?width=1156&format=png&auto=webp&s=270cc376e821174c8cc85cea42554e2bdfe41607

IMPORTANT: 1. Post FX as you wish - 2. If fps don't reach to desired ones, turn Ambient Occlusion Off - 3. Tessellation can be turned down to High (Doesn't make a huge change of impact on fps

https://preview.redd.it/33jtwwxggg1d1.png?width=1743&format=png&auto=webp&s=19d87765406b1e44176233e2bf58bdae2c4bb00e

IMPORTANT: 1. NEVER, If you want FPS, NEVER turn up Extended Distance Scaling, this is the one setting that will crush your CPU down and go 30 fps, believe me - 2. Since we disabled MSAA before and at 1440p it looks horrible without it, we set Frame Scaling Mode to x1,500 since it looks almost the same as MSAA and consumes much less resources

AMD Software: Adrenalin Edition settings

IMPORTANT: 1. AMD Fluid Motion Frames On so you can have the best performance for high refresh rate monitors (Search on YouTube how to install AMD Fluid Motion Frames if the option doesn't appear) - 2. Radeon Boost Off because it looks horrible when looking around - 3. Enhanced Sync On for any tearing - 4. Freesync On if possible ofc

https://preview.redd.it/7c1z04trkg1d1.png?width=2010&format=png&auto=webp&s=4d9de42887c85ab2118aac521858db408c25ee41
https://preview.redd.it/ub48pmh2lg1d1.png?width=2173&format=png&auto=webp&s=e8ea77c80d3ccccf80e958a160e1694b7ead8a09
These are my Overclocking tweaks for my graphics card if you want to know them, you can do it as you see in the image but at your own risk, also the fan speed curve makes the fans louder than normal, at least on my gpu, you can play with it to balance optimum Cº (80) and silence.
Final settings (And maybe the most important ones), I have two other settings that I have turned on so it works perfectly.
RivaTuner - Install it and set it to limit GTA 5 to 60-65fps (With Fluid Motion Frames you'll see 120 fps on screen) so the CPU won't stress on keeping up to the GPU to give the most FPS as possible (This if you have a slower CPU that bottlenecks the GPU as I have) (Don't try to limit the fps from Radeon Software because AMD Fluid Motion Frames will unlimit the FPS and it would'nt work)
Limit the CPU's threads - In this video https://youtu.be/y-66LJcPtBg?si=MvKPKfUr0L_K54Ja , you'll see how to set the Affinity of the GTA5.exe process on Task Manager to use less threads. At least give up two or more threads if possible. (I believe that the game, as it uses all the CPU cores, Windows doesn't like it and it slows down the game on purpose so Windows doesn't stop working)
Most Graphic Impactful Settings

1. Most Impactful
   1. DirectX Version (Don't turn down, DirectX 11 is the best on performance)
   2. MSAA
   3. Texture Quality (Warning clothing and most of textures will look horrible from Normal to High)
   4. Reflection MSAA
   5. Grass Quality
   6. Shadow Quality
   7. Reflection Quality
2. Moderate Impactful
   1. Soft Shadows
   2. Post FX
   3. Ambient Occlusion
   4. In-Game Depth Of Field Effects
   5. Tesselation (High - Very High)
3. Least Impactful
   1. FXAA
   2. Vsync
   3. Pause Game Without Focus
   4. All three sliders
   5. Shader Quality
   6. Water Quality
   7. Particles Quality
   8. Anisotropic Filtering
   9. Tesselation (Off - Normal)

MechE with about 10 years of professional experience and 5 years of internships/co-ops. I have spent most of my career in the automotive field specifically in EV vehicles. I am currently looking for a new position. I used the wiki here plus a previous employers transition resume help. I have been applying a lot but feel that my resume might be hindering my potential positions due to my resume even though I feel that I have a large amount of experience.
https://preview.redd.it/sc6ynd4lfg1d1.jpg?width=5102&format=pjpg&auto=webp&s=f90b181e69ab0bba2c238e5fdcc7efdabdeec21c
https://preview.redd.it/5mx1jf4lfg1d1.jpg?width=5102&format=pjpg&auto=webp&s=9c5c92ea62007296030db00a739e81556270b380

Since I bought the phone, anytime I enter in the camera app I go straight to the latest mode used previously, even with the option in the settings turned off. Latest software updates didn't fix this, one of them being a camera update. Anybody else getting annoyed by this bug? Looks pretty obvious and easy to fix, can't understand how OnePlus don't correct it.

Hi all,
I'm new to 3d printing so my apologies there. But I've got myself a Mars Pro and have been testing some DnD mini prints and even some larger model prints. And mostly I've had success. However, I seem to occasionally have an issue with the bases of my models - they'll have either a strange ripple/wavy effect, or a layered slicing effect.
I assume it must be something I'm not doing but I can't seem to find the answers online at the moment.

• Software: Chitubox V1.9.4
• Printer: Elegoo Mars 3 Pro
• Resin: Elegoo ABS-Like Photopolymer Resin (Grey)
• Environment: Garage

I've attached images of settings and models.
For the Kitsune and Werewolf, they were small DnD miniatures with structure auto added within CHITUBOX. I assumed this wasn't a big deal and just needed sanding down?
However with the Entei model, you can clear see the layering problem I seem to have, if I put models on the base without structures all seems to print fine.
Any help is appreciated, again just starting out so I assume I'm missing something simple? Thanks in advance!
https://preview.redd.it/s5bz0qr99g1d1.jpg?width=1691&format=pjpg&auto=webp&s=5f98611732cc968528897f3f1850b0b56d871b68
https://preview.redd.it/ylwqfqr99g1d1.jpg?width=1639&format=pjpg&auto=webp&s=308f8edf837028be27121f70d86d4189925dff6c
https://preview.redd.it/vth3tqr99g1d1.jpg?width=1581&format=pjpg&auto=webp&s=7c57561d6e5231ac6b567c09458f5dbd30146da9
https://preview.redd.it/y0bibsr99g1d1.jpg?width=1385&format=pjpg&auto=webp&s=3e6b3c0c8742a3ada8ed6de7937522e9a938d9c3
https://preview.redd.it/alhqhsr99g1d1.png?width=635&format=png&auto=webp&s=c813fe21e9dfd5cc263d60edac2c1876f37d307d
https://preview.redd.it/dw4fzqr99g1d1.jpg?width=1490&format=pjpg&auto=webp&s=e414311b5aea8165d0270fa1aa858e9f99bd5230
https://preview.redd.it/92iyzqr99g1d1.jpg?width=1248&format=pjpg&auto=webp&s=54b45d6c6922f245d88f26f37a3b3ee30b3325ea
https://preview.redd.it/i3suwqr99g1d1.png?width=234&format=png&auto=webp&s=c859de72e0ec996856c46694088958e4e2864dfc
https://preview.redd.it/q0441tr99g1d1.png?width=1137&format=png&auto=webp&s=5a16c267297781c2b0cf55319d654eda6f728ac3
https://preview.redd.it/2e7alrr99g1d1.png?width=940&format=png&auto=webp&s=2bf7c22f889481f8ac4557791ad26b70cd3084db
https://preview.redd.it/ulhj1sr99g1d1.jpg?width=1610&format=pjpg&auto=webp&s=f5b283578b97a8c680f67f2d2fa1d7f06c6813cf
https://preview.redd.it/0wyqkqs99g1d1.jpg?width=1269&format=pjpg&auto=webp&s=b713b0d09b554e976019cde3fcd1d32432abf33b

V-Link - A custom HW and SW solution to enhance old cars
I’d like to share a personal project of mine that I‘ve been working on for about 2 years now.
V-Link is an open source software for RaspberryPi OS that acts as a full interface to the car with the help of a custom PCB. One of the main features is the full implementation of Android Auto and Apple CarPlay! Initially I only had my Volvo V50 T5 in mind but in the current state in can easily be adapted for any make and model.
With exposed settings files you can change canbus communication, add external sensors etc.
The HAT has an integrated buck converter that was tested to 5A at 5V and includes an ignition logic to power on and off your raspberry gracefully with an ultra low power consumption in the off state.

• 2x USB-C
• 12V and IGN input
• 12V and 5V output
• Dual CAN Bus
• LIN Bus
• ADC Interface
• Compatibility to PiMost from ModernDayMods (WIP)

This is an enthusiast project. I have no background in electrical engineering or software development so all feedback and input is welcome!!! :)
More infos can be found here:
Github Repository: https://www.github.com/lrymnd/v-link/ Discord Channel: https://discord.gg/DM6948rvu3 Swedespeed Thread: https://www.swedespeed.com/threads/volvo-rtvi-raspberry-media-can-interface.658254/

I’d like to share a personal project of mine that I‘ve been working on for about 2 years now.
V-Link is an open source software for RaspberryPi OS that acts as a full interface to the car with the help of a custom PCB. One of the main features is the full implementation of Android Auto and Apple CarPlay! Initially I only had my Volvo V50 T5 in mind but in the current state in can easily be adapted for any make and model.
With exposed settings files you can change canbus communication, add external sensors etc.
The HAT has an integrated buck converter that was tested to 5A at 5V and includes an ignition logic to power on and off your raspberry gracefully with an ultra low power consumption in the off state.

• 2x USB-C
• 12V and IGN input
• 12V and 5V output
• Dual CAN Bus
• LIN Bus
• ADC Interface
• Compatibility to PiMost from ModernDayMods (WIP)

This is an enthusiast project. I have no background in electrical engineering or software development so all feedback and input is welcome!!! :)
More infos can be found here:
Github Repository: https://www.github.com/lrymnd/v-link/ Discord Channel: https://discord.gg/DM6948rvu3 Swedespeed Thread: https://www.swedespeed.com/threads/volvo-rtvi-raspberry-media-can-interface.658254/

Hi everybody, as the title says, I am a recent architecture grad looking to break into either the fields of project engineering/ management or sustainability. This is my current resume with a link to my design portfolio. Any advice on how to better stand out is gladly welcome
https://preview.redd.it/xz9n3n1epf1d1.png?width=720&format=png&auto=webp&s=c9f5cfb7a94202afd6bb164372c50f0473c2c93c

I'm curious if continued development is a plan. There are hundreds of writing software: some with outdated UIs, some that seem dead (Plot Factory and Shaxpir). Some lack features, some have useless features. But is there any further development plan or road map?
NEW CARDS: As of now it has plenty of different way to plot/outline, but it lacks Character Cards, Location Cards, Item Cards (good for Fantasy and Science Fiction). Now yes you can use one of the many plot/outline card features to do the same thing. But I feel it would be better if they had their own area.
WRITING GOALS: I think a 'Writing Goal' section could be useful as well as from what I've heard from other writers it helps motivate them to write. This idea (Writing Goals) 100% should be added to have its own area on the Project Home page to allow users to set a goal for all their writing. Such as 500 daily, weekly, monthly. To better explain this see the screen shot of a paid online writing service (Novel Pad). You can set a goal by day, week, or month. You can have it count the whole manuscript or scenes individually.
https://preview.redd.it/l2wrr6t2hf1d1.jpg?width=1864&format=pjpg&auto=webp&s=df88645363a702c9f8c45c50c1a4dfad2bf61447
STYLE BUG: There is also a bug with Page/Typewriter Style options. I can select a color, but when I close the application (on Windows 11; used Edge to install the app) and reopen it the colors go back to default. If you open the options to change them you can see Wavemaker has the correct colors I chose, but i have to reenter the options area every time in order to get the colors I picked to display (this shouldn't be like this).
DOCUMENT PREFERENCES: I see by default you set it up to auto un-indent the first paragraph. Seems like it should have an option to turn this off as this is a personal preference and not industry standard for manuscript formatting.
Note: Also posted on Discord.

Here's a very short summary of what a "Worker" on 2Captcha does; Click start, wait for a captcha to appear, and do your best to solve them. Don't worry, the captchas are very simple and easy. For example, you're tasked to choose which of the 6 choices has the number 14 (7 times) while taking into account the short time allotted for each task. I used to hate this one since the time was shorter back then and you have to find the right answer 20 times ( o ___ o ) And it wasn't just a few dice per option so it was confusing and irritating to be honest XD Thankfully, they added more time for the tasks YAY! either that or I just assumed they gave us workers more time due to the frequent and similar complaints :P
If you want to increase your earnings with 2Captcha you may (but I believe it's more appropriate to say SHOULD XD) install their software. But if you're afraid to download and install anything on your pc or mobile phone, it's absolutely FINE since you still have the option of working through their website or even on Telegram. I just prefer using their apps for both windows and phones.
I've already mentioned in one of my previous post about 2Captcha having an auto earn feature when using their software. I actually haven't tried it on Telegram etc. since you know, I prefer the apps haha Even though auto earning is not guaranteed for ALL captchas, it still helps you earn little by little. In time, your $0.00015 balance will grow and turn into $1 or maybe even up to $10 and so on. It is very possible to earn such an amount BUT of course, it still depends on your diligence and what kind of captcha you'll need to solve.
I am still not very active due to personal issues so my overall earnings is less than $5. It's not much right?! But for me, it still helps with my expenses in a way.
There are lots of options when you cash out but my preferred method is through Payeer (minimum withdrawal amount of $0.50). I love testing out apps or sites that have very low thresholds :> At least they pay, unlike the other sites or apps that promised high amounts of money for your time and will not even let your withdraw your money. But that's for another discussion XD
Withdrawing your earnings' pretty easy once you've already set up your chosen method of payment (wallet type), enter the amount you wish to withdraw, and then request for a payout. You'll then see your payout list just below that to keep track of your transaction. They even send an email right after so you're sure the payout request will be processed. Did I mention that the wait time for your money is very fast??! Because it is! I once received my payout in less than 30 minutes but the payout request processing still varies :>
Feel free to comment or message me if you want see my other withdrawals or payouts~
Thank you for taking the time to read this post of mine! I hope you'll have a lovely day or night~ <3
https://preview.redd.it/uanvf7md2f1d1.jpg?width=1062&format=pjpg&auto=webp&s=2850cda8b8b2d1ae1ad8caf501a936616afc192a

I would like some pointers to improve my bullet points and other problems you see. Targeting ME roles in any industry at this point. No internships during college, holding 5 months of project management experience and 1 month of SolidWorks as an ME intern (counting by dates and not entire month). I am on F-1 OPT and it seems next to impossible to find an employer that will sponsor at my degree and experience level.
Answering some expected questions from my resume.

1. Why was your first role only two months? Hired assuming I didn't need sponsorship. A rare HR "oops" moment. I am partly to blame. I will post details in an appropriate subreddit and link it in an edit (no promises). I was suggested to call this role an internship and not full time to avoid this question, is that sound advice?
2. How are you back in the same role? I am a contractor now. I approached a contracting company for help and they approached my management and things worked out. For those who understand immigration jargon, the contracting company is not E-verified and I have to leave if I want my STEM extension.

2nd time posting so I want to address some comments from when I posted first.

1. Got picked on for identifying "Design Lead" on senior design project. Mixed opinions from reddit users so I kept it. How are we feeling about it now? It doesn't mislead a recruiter into thinking it was a position.
2. Someone said my resume looked like a generalist and not a specialist, with about 5 months of exp in project management, how do I tailor my resume to make me sound like I'm a PM specialist?

Thank you.
EDIT: Added a question about first role.
https://preview.redd.it/ybz1smiwye1d1.png?width=5100&format=png&auto=webp&s=404ec1016c9821264b264ba73884b34a4609fa7c

Just got the MYP and Summons/Smart Summons were advertised under the FSD option for $8k (attached). I ended up deciding to try the 30 day trial first before pulling the trigger but I can’t for the life of me figure out where these features are.
I read some posts saying they were gone with new models due to the removal of ultra sonic sensors but some other posts saying they’d be added back by April. I can’t imagine they’d advertise their existence if they are gone so I assume I’m missing something.
Thanks!

Master of Engineering to Civil Engineering DWG

Converting a Master of Engineering (MEng) degree to Civil Engineering DWG files typically involves the process of translating engineering concepts, designs, and plans into detailed technical drawings using software like AutoCAD.

Step 1: Understand Your Content

Review the Thesis/Project: Identify the essential parts of your thesis or project that need to be represented in a DWG file. This typically includes:

• Structural drawings
• Site plans
• Layouts
• Cross-sections
• Detailed engineering designs

Step 2: Prepare Your Data

1. Gather Data: Collect all relevant data, sketches, notes, and any existing digital files (such as PDFs, Word documents, or other CAD files).
2. Organize Data: Ensure all data is organized and easy to reference.

Step 3: Choose CAD Software

1. Select Software: Choose CAD software that supports DWG files. AutoCAD is the most commonly used, but other software like BricsCAD or DraftSight can also be used.
2. Learn the Basics: If you’re not familiar with CAD software, take some time to learn the basics or follow tutorials specific to civil engineering.

Step 4: Convert to DWG

1. Manual Drawing:
   • Start a New Project: Open your CAD software and start a new project.
   • Input Data: Begin by drawing your site plan, structural details, and other elements based on your gathered data. Use layers to organize different parts of the drawing (e.g., electrical, plumbing, structural).
   • Add Details: Include all necessary dimensions, annotations, and notes.
2. Using Conversion Tools:
   • Scan to CAD: If you have hand-drawn sketches, you can scan them and use raster-to-vector conversion tools available in some CAD software.
   • PDF to DWG: If you have PDF files, many CAD programs allow you to import PDFs and convert them to DWG files. This can be a good starting point, but you may need to clean up the drawing afterward.

Step 5: Verify and Refine

1. Check Accuracy: Ensure that all elements are accurately represented. Double-check dimensions and alignment.
2. Refine Details: Make sure all details are clear and well-documented. Add labels, legends, and scales as necessary.

Step 6: Finalize the DWG File

1. Review: Thoroughly review the DWG file to ensure completeness and accuracy.
2. Save: Save the final version of your DWG file.

Step 7: Export and Share

1. Export: Export the DWG file in the required format. You may also need to create PDF versions for easy sharing and review.
2. Backup: Always keep backups of your DWG files and any other important project documents.

Additional Tips

• Templates and Blocks: Use standard templates and blocks to save time and ensure consistency.
• Collaboration: If possible, collaborate with someone who has experience with CAD software to help streamline the process.
• Learning Resources: Utilize online resources such as AutoCAD forums, YouTube tutorials, and CAD software documentation.

Example Workflow for AutoCAD

• Open AutoCAD and create a new drawing.
• Set Up Layers: Create layers for different elements (e.g., structural, electrical).
• Draw Site Plan: Use line, polyline, and arc commands to draw the site plan.
• Add Details: Use hatch, dimension, and text tools to add details and annotations.
• Review and Edit: Continuously review your drawing, making necessary edits.
• Save and Export: Save your work frequently and export the final drawing as a DWG file.

Following these steps will help you convert your MEng thesis or project into a professional DWG file suitable for civil engineering applications.
https://www.civilengineeringdwg.com