Riversource & variable annuity

Preamp advice

2024.06.01 11:57 mtnmantra Preamp advice

Considering a (Buckeye) Hypex power amp to drive my Magnepan speakers and Rythmik subwoofer.
What (under $1k) preamp should I pair with the Buckeye, if I need a [variable] sub output?
Open to different configurations, including high current integrateds.
Thanks
submitted by mtnmantra to StereoAdvice [link] [comments]


2024.06.01 07:54 sprinjetsu 401k with Variable Annuity and Rollover

I have three retirement accounts from previous jobs: a Valic Corebridge 401(k) Variable Annuity Pension plan, a Simple IRA with American Century, and a soon-to-be-opened solo 401(k) with Fidelity. I wanted to consolidate these accounts into the solo 401(k), but I'm struggling to understand the 401(k) Variable Annuity Pension plan. Despite researching, I'm finding it increasingly complex, with multiple fees, insurance components, riders, and investment options. The online account lacks transparency, and I had to contact the plan administrator (who also earns commissions and fees) to learn more. I'm seeking guidance on what documents to request to better understand this plan, including:
I want to determine if rolling over the 401(k) Variable Annuity Pension plan into the solo 401(k) will incur fees, surrender charges, or other penalties. Your assistance is greatly appreciated!
submitted by sprinjetsu to personalfinance [link] [comments]


2024.06.01 02:17 jatslo 🎓 #AMP aka $AMP: 📜

🎓 #AMP aka $AMP: 📜
https://preview.redd.it/15rtxeqcsu3d1.png?width=1634&format=png&auto=webp&s=6b452c1cd87b77f33bc9a6092be09c6fcede1fae
🎓 #AMP aka $AMP: 📜
  1. đź›’ Buy Limit Price = 0.00698 (1.00x DCAP)
  2. đź›’ Sell Limit Price = 0.00706 (1.00x DCAP)
✖️ℹ️ℹ️Ⓜ️Ⓜ️ Variables & Navigation:
https://algorithm.xiimm.net/phpbb/viewtopic.php?p=9529#p9529
submitted by jatslo to jatslo [link] [comments]


2024.06.01 02:15 AbeFromanSKOC Dune racer motors fried?

Believe I burnt up a motor or two today. Recently converted my twins two dune racers to RYOBI 18v batteries. Went great to start but after a few days one of them stopped working.
Wife reported that when she opened the battery compartment a small amount of smoke came out and it smelled.
When I got home I examined the battery and it looks fine, charges, runs great in the other power wheels.
Checked my 30 amp fuse (not blown) changed for good measure inserted a new battery still nothing. Time to take things apart..
I could still smell a bit of an electrical odor inside when I opened up the area with the motors. motors had bit of blackening outside of the vents shown in photos.
I’ve inspected the remainder of the wiring and pedal all appears to be in order.
I’m kind of drawing a blank other than replacing the motors and seeing what happens.
Any help would be appreciated. Motor and pedal recommendations also welcome.
considering ML Toys stage 3 w/ new gear boxes. Their website says to use their soft start module which I think I can avoid with a variable speed pedal?
Thanks
submitted by AbeFromanSKOC to PowerWheelsMods [link] [comments]


2024.06.01 00:59 Vorgius AMP Saver Interest Question

Hi, I opened an AMP saver account towards the end of last month (May) and deposited $1000 which cleared before the start of this month (June), should there be an indication somewhere that I am now eligible for the bonus variable interest in this month (June)? My account summary still shows only 1.20% per annum, thanks.
submitted by Vorgius to AusFinance [link] [comments]


2024.05.31 20:11 S2SFF Large Router bit question

I’m making some round 3 inch diameter outdoor table legs out of big box kiln dried redwood 4x4s.
My plan is to mill them down to 3 inches square and then run them 4x through my router table removing each corner using a 1 1/2 inch round over bit. Basically making a large dowel.
I will leave enough extra material on each end to leave square and stable through the final pass.
My question is, can my variable speed Bosch 1617 2.25 12 amp motor handle this operation in one pass?
Asking before I drop $200+ on the router bit.
Thanks in advance!
submitted by S2SFF to woodworking [link] [comments]


2024.05.31 16:37 LodoLoco Drill suggestions for mixing concrete.

Hi everybody!
I'm making these concrete garden bed molds as a gift and doing so in my apartment. I've been mixing in a 5-gallon bucket with a borrowed drill and an egg-beater mixer, but I want to get my own because I plan to make a good amount more over time and lend out the molds/equipment to some other friends that liked the idea.
I don't want to spend too much on it since I'm probably not going to use it for anything else, but I do want to make sure it can actually handle mixing concrete without having to worry about it melting. This is what I'm looking at. I also saw this, but I didn't like the oversized rear handle, especially since you can't use it while using the side handle. In addition, the D-handle drill has higher amperage, which to my understanding means more torque than the mixer one (I didn't see any torque specs for either).
Thanks!
submitted by LodoLoco to Tools [link] [comments]


2024.05.31 04:21 Fun_Sense2384 Garage sale gem

Garage sale gem
Found this $3 gem at a garage sale works perfectly was just missing the corner screws. Duh ok, but any suggestions on bringing this to the future.
submitted by Fun_Sense2384 to diyelectronics [link] [comments]


2024.05.31 03:04 BOfficeStats Domestic BOT Presale Tracking (May 30). Thursday Previews: Bad Boys ($3.85M/$5.10M EA+THU), The Watchers ($0.89M), Inside Out 2 ($8.65M) and Deadpool and Wolverine ($30.46M).

BoxOfficeTheory Presale Tracking
USA Showtimes As of May 30
Presales Data (Google Sheets Link)
BoxOfficeReport Previews
Quorum Update (May 29)
DOMESTIC PRESALES
Bad Boys: Ride or Die Average Thursday / EA+Thursday comp: $3.85M/$5.10M
The Watchers Average Thursday Comp: $0.89M
The Lord of the Rings Extended Edition Re-Releases (June 8-10)
Inside Out 2 Average Thursday Comp: $8.65M
The Bikeriders
A Quiet Place: Day One
Deadpool and Wolverine Average Thursday Comp using TheFlatLannister's Dune2+GOTG3 comp: $30.46M
Domestic Calendar Dates (last updated May 23):
MAY
JUNE
JULY
AUGUST
Presale Tracking Posts:
May 11
May 14
May 16
May 18
May 21
May 23
May 25
May 28
Note: I have removed most tracking data that has not been updated for 2 weeks. I think there is value in keeping data for a week or two but at a certain point they start to lose their value and should not be treated the same as more recent tracking data.
submitted by BOfficeStats to boxoffice [link] [comments]


2024.05.30 22:11 NTAP4 [WTS][USA-CA][H] Dragonfly Black USB DAC+PREAMP+AMP [W] $42 Paypal G&S

[WTS][USA-CA][H] Dragonfly Black USB DAC+PREAMP+AMP [W] $42 Paypal G&S
Selling this because I bought it a couple years back and never took it out of the box. Really don’t know what it’s worth new in-box and have little knowledge on it in general. Feel free to send over offers if my asking is too high!!
Thanks for reading!
https://preview.redd.it/2l76ufzhfm3d1.jpg?width=3024&format=pjpg&auto=webp&s=f7d39359268115bd4a839dd73dee1706164c5fc1
submitted by NTAP4 to AVexchange [link] [comments]


2024.05.30 20:26 peatypeacock Treating fresh-sanded plaster before wallpapering?

Treating fresh-sanded plaster before wallpapering?
tl/dr: Do I need to paint or seal plaster after sanding it before I hang wallpaper?
Background: I'm planning to redo our half-path, adding waintscoting (or, more likely, faux wainscoting: a chair rail and shadow box trim) and wallpaper above the chair rail.
Thing is, our house is from the late 19th c. and the walls are all plaster, and they've got an uneven finish. Not texture, precisely, but very far from smooth. Pic from a room that has slightly better lighting
I hung wallpaper over it without sanding in one little spot, and it's super lumpy; I don't particularly care because it's just the eaves in my office, but I know I need to sand for a public part of the house. Planning to buy myself one of these and have at it.
A) Is this a reasonable plan? Just sanding and trying to even out? It's been suggested that I might just hang drywall over the plaster but it's a TINY space and I don't want the walls encroaching farther than they already are (plus I'd have to manage things like removing and replacing a baseboard heater to make that happen, which is WELL beyond my skillset, as well as navigating a lot of fixtures).
B) Do i need to treat the raw, freshly-sanded plaster in any particular way before hanging the wallpaper (or painting, for that matter)? I'll use wallpaper paste rather than any kind of self-stick nonsense, but I don't know how porous paster is or whether or not that matters.
submitted by peatypeacock to fixit [link] [comments]


2024.05.30 05:08 Misery-Misericordia Me trying to use creative movement options on my Psychic

Me trying to use creative movement options on my Psychic submitted by Misery-Misericordia to pathfindermemes [link] [comments]


2024.05.29 20:46 MolaMolaMania Bose WH-1000X M3 – Recommendations sought for Bluetooth adaptor for old Fisher amp

Greetings!
I have tried ordering various 6.35mm to 3.5mm cables off Amazon to connect my headphones to my venerable Fisher amp that I bought in 1988 and is still kicking.
However, all the cables have had a maddeningly loose connection to the headphones, such that the slightest movement of the head will pull the connector out enough to drop signal from one of the speakers.
I'm heading out to a local computer store to see what they might have in terms of a better cable in the length I want with a firmer connection, but I'd love to be able to take advantage of the Bluetooth functionality.
However, there are SO many models out there, and I've no idea which brands are good or which would be a good fit for my particular Bose model. Also, most only have the 3.5mm connector, which means I still have to use one my gold plated 6.35mm connectors just to connect it to my stereo. I'm assuming that won't be a problem, but I'd love to have fewer connections and reduce troubleshooting variable.
I would love to hear any suggestions on Bluetooth adaptors that you have.
Thanks very much!
submitted by MolaMolaMania to headphones [link] [comments]


2024.05.29 17:48 NCTransportation Know a Handyperson looking for a great job with NCDOT Ferry in Manns Harbor?

NCDOT Ferry is hiring an entry level Maintenance/Construction Technician to join our team in Manns Harbor, NC on the Outer Banks! Pays $31K to $50K w/full State benefits & pension! Apply by June 17 at https://www.governmentjobs.com/careers/northcarolina/jobs/4521793-0/maintenance-construction-technician-i
In this role, you will:
submitted by NCTransportation to EasternNC [link] [comments]


2024.05.29 17:48 NCTransportation Know a Handyperson looking for a great job with NCDOT Ferry in Manns Harbor?

NCDOT Ferry is hiring an entry level Maintenance/Construction Technician to join our team in Manns Harbor, NC on the Outer Banks! Pays $31K to $50K w/full State benefits & pension! Apply by June 17 at https://www.governmentjobs.com/careers/northcarolina/jobs/4521793-0/maintenance-construction-technician-i
In this role, you will:
submitted by NCTransportation to NorthCarolina [link] [comments]


2024.05.29 15:51 Zealousideal_Bear657 Exponent 500 and HPF/LPF?

Just a quick question for anybody knowledgeable or who owns the amp.
Does the e500 have the option for variable High Pass or Low Pass filters, and can they be assigned to the quick pots?
Cheers, Whatever my username is
submitted by Zealousideal_Bear657 to Darkglass [link] [comments]


2024.05.29 09:04 BOfficeStats Domestic BOT Presale Tracking (May 28). Thursday Comps: Haikyu!! ($0.91M), Bad Boys: Ride or Die ($3.47M THU, $5.34M EA+THU), The Watchers ($1.00M), Inside Out 2 ($7.63M), and Deadpool and Wolverine ($30.46M).

BoxOfficeTheory Presale Tracking
USA Showtimes As of May 17
Presales Data (Google Sheets Link)
BoxOfficeReport Previews
DOMESTIC PRESALES
Haikyu!! The Dumpster Battle Average THU Comp: $0.91M
In a Violent Nature
Summer Camp
Young Woman and the Sea
Bad Boys: Ride or Die Average Thursday / EA+Thursday comp: $3.47M/$5.34M
The Watchers Average Thursday Comp: $1.00M
The Lord of the Rings Extended Edition Re-Releases (June 8-10)
Inside Out 2 Average Thursday Comp: $7.63M
The Bikeriders
Deadpool and Wolverine Average Thursday Comp using TheFlatLannister's Dune2+GOTG3 comp: $30.46M
Domestic Calendar Dates (last updated May 23):
MAY
JUNE
JULY
AUGUST
Presale Tracking Posts:
May 11
May 14
May 16
May 18
May 21
May 23
May 25
Note: I have removed most tracking data that has not been updated for 2 weeks. I think there is value in keeping data for a week or two but at a certain point they start to lose their value and should not be treated the same as more recent tracking data.
submitted by BOfficeStats to boxoffice [link] [comments]


2024.05.28 18:08 SeanTYH Trying to understand address-of operator returning a pointer as rvalue

I am trying to comprehend the C++ Primer 5th Edition page 135 where it says:
address-of operator requires an lvalue operand and returns a pointer to its operand as an rvalue.
Now, I know that the address-of operator returns the address of a variable, reading up the [docs](https://learn.microsoft.com/en-us/cpp/cpp/address-of-operator-amp?view=msvc-170) says that what is being returned is actually a pointer to the variable. So for example:
int ivar = 10; int* p = &ivar; 
Can I understand this as:
  1. address-of operator gets the address of ivar and creates a temporary pointer to the variable
  2. temporary pointer is assigned to used to initialise p which copies over the values of the temporary pointer, which is the memory address?
  3. we are using the values of the temporary pointer (the memory address it points to) rather than the object's identity (its location in memory) - referring to the temp pointer; so that is why the returned temp pointer is an rvalue?
submitted by SeanTYH to cpp_questions [link] [comments]


2024.05.28 17:03 Thorsenine Created a bench power supply for projects from old but working computer PSU, but keeps on shutting down

Created a bench power supply for projects from old but working computer PSU, but keeps on shutting down
https://preview.redd.it/tfcfrkl6e63d1.jpg?width=1280&format=pjpg&auto=webp&s=69757a1e3f0dd9c30a5807001e0cb8e9c52d0007
Here's the schematic diagram...
PSU : Seasonic 430W PSU (Model : SS-430HB) - Good known working unit DC to DC Stepdown : LM2596 Buck Converter Amp and voltmeter : DSN-VC288
Tested the PSU out of the PC, shorted green to ground and it worked with the following results:
  • 12V : Average 12.03v (3 test points)
  • 5V : Average 4.98v (3 test points)
  • 3.3V : Average 3.1v (3 test points)
  • Grey (PWR OK) : 5.02v
  • Purple (STD BY) : 5.04v
  • 3.3 Sense : 2.9v
Then I disassembled and reassemble it on a chassis, during testing it turned on, but voltages across test points are fluctuating as low as 10% of the expected voltage... I placed a 5omhs 10W resistor on the STD BY rail, it gave a stable voltage, however when I tried to use the 5V case fan as a dummy load on the 5V rail and the 12V fan on the 12V rail, it keeps on shutting down.
I placed the 5V fan on the STD BY rail and the 12V fan on the fan header on the board, it turned on but still shuts down after I put the LM2596 on the 12V rail, tried placing another 5omhs 10W resistor on the 3.3V sense line, same behavior. I placed a LED on the 3.3V Sense Line and it started to work and getting these readings
  • 12V : 11.89v
  • 9V : 9.03v
  • 5V : 4.8v
  • 3.3V : 2.95v
  • Grey : 4.97v
  • Purple : 4.92v
  • 3.3V Sense : 2.7v
Confident with the readings, I decided to complete the wirings. I think I should've not relied just on the readings alone without a load. Tested it using a mini drill a 6-12v 500mA drill and the PSU is shutting down again. When I place the mini drill on the 3.3V it worked and the reading is 2.8v 0.3a, when I test the 5V rail, the reading is 4.7v 0.4a, when I test it on the 9V and 12V, it shuts down. I tested it again using another 10ohms 10W resistor and the PSU is still shutting down on the 9V and 12V rail.
Any recommendations on what other things to check or do?
I also tried putting a dummy load on all rails, no luck... tried even shorting the 3.3V Sense to ground, it turned on, but, this time it shuts down when there's a load on 5V and 12V rail.
Any inputs is highly appreciated... TIA
submitted by Thorsenine to diyelectronics [link] [comments]


2024.05.28 16:56 jatslo 🎓 #AMP aka $AMP: 📜

🎓 #AMP aka $AMP: 📜
https://preview.redd.it/njqc8ugil63d1.png?width=1066&format=png&auto=webp&s=f1958a76a46831dd8e9e57dadcd2094ecfef361a
🎓 #AMP aka $AMP: 📜
  1. đź›’ Buy Limit Price = 0.00691 (1.00x DCAP)
  2. đź›’ Sell Limit Price = 0.00699 (1.00x DCAP)
✖️ℹ️ℹ️Ⓜ️Ⓜ️ Variables & Navigation:
https://algorithm.xiimm.net/phpbb/viewtopic.php?p=9422#p9422
submitted by jatslo to jatslo [link] [comments]


2024.05.28 04:24 PiastriPs3 Does the modern dating process and relationships quash mens individuality?

Consider that men are far more variable in behaviour, personality types than women.
https://www.sciencedirect.com/science/article/abs/pii/S0092656612001730#:~:text=Importantly%2C%20men%20tend%20to%20vary,results%20with%20this%20in%20mind.
Whilst women tend to be attracted to a far more narrow spectrum of masculine behaviour and personality types in men.
[Redacted] Wrong link. Study was on masculine vs feminine faces, not behaviour
Those who are unable to mask or remodel their unique behaviour like autistic men on the extreme end face higher rates of loneliness than autistic women.
"Interestingly, while Autistic women tended to have less sexual desire, they were more likely than autistic men to be in committed relationships"
https://www.google.com/amp/s/neurodivergentinsights.com/autism-infographics/autism-and-sexual-diversity%3fformat=amp
Generally, it seems like dating is just a giant big personality and behavioural mould forcing the average man to suppress significant to minor aspect of their individuality to conform to the average women's much narrower sexually dimorphic preferences and gendered expectations of male behaviour.
So does dating and relationships quash mens innate individuality as men unconsciously or not suppress and remodel their behaviour to fit a certain ideal or narrow spectrum of what women generally find sexually attractive during their formative years?
And lastly, do women undergo the same process of behavioural remoulding and suppression as men to fit desirable mens preferences?
submitted by PiastriPs3 to PurplePillDebate [link] [comments]


2024.05.28 03:25 jatslo 🎓 #AMP aka $AMP: 📜

🎓 #AMP aka $AMP: 📜
https://preview.redd.it/bdlbu6fwk23d1.png?width=1066&format=png&auto=webp&s=6ceab94eb6e8564de88c42c8b8472674ead3cd4d
🎓 #AMP aka $AMP: 📜
  1. đź›’ Buy Limit Price = 0.00702 (1.00x DCAP)
  2. đź›’ Sell Limit Price = 0.00710 (1.00x DCAP)
✖️ℹ️ℹ️Ⓜ️Ⓜ️ Variables & Navigation:
https://algorithm.xiimm.net/phpbb/viewtopic.php?p=9420#p9420
submitted by jatslo to jatslo [link] [comments]


http://activeproperty.pl/