I have a very cursed set up rn. I'm running an rx580 with: 1. Acer monitor 1080p 144hz DVI connection to the GPU 2. Dell S2719DGF 1440p 144hz HDMI connection to the GPU 3. Old LG Flatron W2240 1080p 60hz Displayport to the GPU
Sometimes while downloading a large file (steam) or leaving something open (roblox auto-farm) I will just leave the computer on and press the power buttons on all 3 monitors. I updated to windows 11 about a week ago, and did this exact thing today. upon turning the monitors back on after about 6 hours of idling, monitors 2 and 3 (as numbered above) continuously reset their orientations, switching the open windows between themselves, throwing my mouse cursor all over, flickering and glitching in general, back and forth until I eventually unplugged #2 from the PC after like 2 minutes. Back on windows 10, this would happen maybe once or twice but the monitors would always find themselves and startup just fine after like 10 seconds. So i'm wondering if this is a driver issue, an OS issue, maybe my HDMI cable is faulty (although i have 3 different ones that all work fine except for this exact situation which after testing, i've found happens with all 3)
Another theory might be some software issue, as im using START11 (bc vanilla win11 sucks imo) and wallpaper engine through steam. They're the only new things i've installed since moving to 11, but I don't know how either of those things would effect this issue. Any advice is appreciated ty.
TLDR: how do I stop my displays from flickering back and forth after turning them on manually?

Global electric vehicle battery management system (EVBMS) market will reach $21,069.6 million by 2031, growing by 16.5% annually over 2022-2031, driven by the rising sales for electric vehicles (EVs), increasing demand for sustainable and clean energy vehicles, supportive government initiatives, and the depleting fossil fuel and rising environmental awareness amongst people.
Profound analysis and assessment are generated from premium primary and secondary information sources with inputs derived from industry professionals across the value chain. The electric vehicle battery management system (EVBMS) market report is based on studies on 2019-2023 and provides forecast from 2024 till 2031 with 2023 as the base year.
Download Research Sample: https://altusmarketresearch.com/reports/sample/43070
In-depth qualitative analyses include identification and investigation of the following aspects:
• Market Structure • Growth Drivers • Restraints and Challenges • Emerging Product Trends & Market Opportunities • Porter’s Fiver Forces
The trend and outlook of global market is forecast in optimistic, balanced, and conservative view by taking into account of COVID-19 and Russia-Ukraine conflict. The balanced (most likely) projection is used to quantify global electric vehicle battery management system (EVBMS) market in every aspect of the classification from perspectives of Component, Product Type, Application, Battery Type, Propulsion Type, Vehicle Type, and Region.
Based on Component, the global market is segmented into the following sub-markets with annual revenue ($ mn) for 2022-2031 included in each section.
• Hardware o Fuel Gauge/Current Measurement Devices o Temperature Sensor o Integrated Circuits o Cutoff FETs and FET Driver o Microcontroller o Other Hardware • Software & Services
Based on Product Type, the global market is segmented into the following sub-markets with annual revenue ($ mn) for 2022-2031 included in each section.
• Distributed BMS • Centralized BMS • Modular BMS
By Application, the global market is segmented into the following sub-markets with annual revenue ($ mn) for 2022-2031 included in each section.
• Voltage Monitoring • Thermal Management • Current Management • Charging and Discharging Control • Other Applications
By Battery Type, the global market is segmented into the following sub-markets with annual revenue ($ mn) for 2022-2031 included in each section.
• Lithium Ion • Redox Flow • Lead Acid • Other Battery Types
By Propulsion Type, the global market is segmented into the following sub-markets with annual revenue ($ mn) for 2022-2031 included in each section.
• Battery Electric Vehicles (BEVs) • Hybrid Electric Vehicles (HEVs) • Plug-in Hybrid Electric Vehicle (PHEVs) • Fuel Cell Electric Vehicle (FCEVs)
By Vehicle Type, the global market is segmented into the following sub-markets with annual revenue ($ mn) for 2022-2031 included in each section.
• Passenger Cars • Commercial Vehicles • Other Vehicles
Geographically, the following regions together with the listed national/local markets are fully investigated:
• North America (U.S., Canada, and Mexico) • Europe (Germany, UK, France, Spain, Italy, Netherlands, Rest of Europe; Rest of Europe is further segmented into Russia, Switzerland, Poland, Sweden, Belgium, Austria, Ireland, Norway, Denmark, and Finland) • APAC (Japan, China, South Korea, Australia, India, and Rest of APAC; Rest of APAC is further segmented into Malaysia, Singapore, Indonesia, Thailand, New Zealand, Vietnam, Taiwan, and Philippines) • South America (Brazil, Chile, Argentina, Rest of South America) • MEA (UAE，Saudi Arabia，South Africa and Rest of MEA)
The report also covers current competitive scenario and the predicted trend; and profiles key vendors including market leaders and important emerging players.
Selected Key Players:
Analog Devices Inc. BYD Contemporary Amperex Technology Co. Limited (CATL) Hyundai Mobis Infineon Technologies AG Keihin Corporation NXP Semiconductors Renesas Electronics Corporation SAIC Motor Corporation Limited Silicon Laboratories TE Connectivity Tesla Motors Texas Instruments Incorporated Visteon Corporation Vitesco Technologies (Please note: The report will be updated before delivery so that the latest historical year is the base year and the forecast covers at least 5 years over the base year.)

Where can I download drivers for Micros tabler dt317cr?

I recently had to update the drivers for the Oculus app, after doing so it kept giving me the notification for the driver and wouldn't let me connect at all to the Q2. I tried repairing the app however it gave me an error and I could no longer open the oculus app. I had to go on the website to redownload the app software, but once done it said there was an error downloading and I needed to reset my pc, so I did... and kept getting the same error, I tried plugging in the quest 2 this time around... still error, I tried a bunch of times but it kept giving me the "Reset PC" error... really not sure what to do at this point... anyway to get around this? Thanks.

Hello, I have a new build with a NVIDIA 4060 in it, however I am having games crash due to error code 31 with the Display Adapter. I have researched the issues, stating that I need to either rollback the drivers on that adapter, or uninstall and check for updates. But I am also seeing that I should not even have this pop up since I have the 4060 installed. I have downloaded the GeForce Experience app and also manually downloaded the newest driver (552.44) that is available as of today.
I am at a loss for why I even have this in my Device Manager, this is the first PC. I can post whatever is needed for assistance as well. Thank you for any help provided.

NEW APP ⭕ DABBLE ⭕ Free $10 just to sign up! No deposit 🚫 📌 Download Dabble in app store (no link) 📌 Enter in the code field: drago78 📌 Sign up/Verify email 💰Place bets with the free $10 and cashout!
Only available in AK, CA, DC, FL, GA, IL, KS, KY, MN, NE, NM, NC, ND, OK, OR, RI, SC, SD, TX, UT, WI.

Hi my name is Humberto, I am looking for friends that have similar interests/play games with and they are as follows:
Video games, Anime, Manga, K-pop, K-hiphop, K-rap, K-rnb, Technology, Cybersecurity, True crime, Korean/Japanese movies and various other movies/shows
I will sort of spam you with memes I find funny
Overwatch - I mainly play QP role queue and I main Ana but can play Baptiste, Zen and Lifeweaver
I've been playing since 2016
If you care about rank I was diamond in OW1
I am chill/don't rage but I do try to win every game
Old School Runescape - I got a random itch to play again and I am farming Vyrewatch Sentinels for blood shards
Fornite (No build) - I have about 2hrs on it but would like to learn it so don't decapitate me for messing up lol
Granblue Fantasy Relink - I bought this one awhile back and I am really enjoying the combat
Diablo 4 - I am interested in playing S4 and I went with a Necromancer minion build
Lethal Company - I have about 30hrs of play time and I mainly play modded
Last Epoch - I am willing to jump back on my lvl 99 Necro and run high corruption or make a new character
Content Warning - I am 10 hrs in and I'm fine with modded or vanilla
Genshin Impact (AR36) - I have not played in months and would like some help cause I am a headless chicken I own a Steamdeck and mainly use it for emulation
My Spotify playlist https://open.spotify.com/playlist/2uf1teGA3jxKrclja1EdjX?si=2920aa546b594786
I can be quiet and shy at first especially in VC so just letting you know but on the other side of that I like talking/hanging out daily If possible
I would really like if we could watch movies/shows or anime together
My 2nd language is Spanish
Top 10 Movies - The Raid, The Raid 2, Coherence, Drive, Baby Driver, Whiplash, I Saw the Devil. Train to busan, Perfect Blue, The Guest
Anime I seen and enjoyed - Jujutsu Kaisen, Solo Leveling, Zom100, Demon Slayer, Bleach, Dragon ball Z/Super, Attack on titan, One Punch Man, Clannad, Magic Knight Rayearth, Kite, Perfect Blue, Sword Art Online,Akame Ga Kill, Elfen Lied.
For shows I am into Gen V, Stranger Things, The Boys, Invincible and Squid Game
My only hard requirements are that you are between 21-30
I highly prefer that you are from North America in-case we end up playing together because of timezone/ping

Mods, if this goes against some guideline or rule, then I apologize, but I struggled with this problem for months and tried everything, until I finally found a fix, and I wanted to share for those also dealing with the same issue.
I've been stuck on Canary build 26040 for months, and every time I would attempt to update, I would reboot only to get stuck on a frozen circle.
I tried all sorts of different solutions on reddit, including using different builds etc, and nothing worked, until I came across this post: https://www.elevenforum.com/t/fix-stuck-on-26040-and-cannot-install-26058-or-higher.24141/
Credit to 'Foyzul' for posting this, as I am now able to update to the latest build 26217.5000
Step 01: 1. Grab the ISO of 26058 *You can use UUP dump 2. Extract the ISO to someplace like c:\Win11 -to modify it later 3. Download an ISO of the current release canary channel insider preview build (as of writing this is 26080) 4. Replace the boot.wim and install.wim files in directory of the extracted ISO (c:\win11\sources\...wim) from build 26080. *l utilized a program named Any Burn for this task, but feel free to choose any ISO editor that you prefer.
Step 02: To perform a Windows command-line update with the specified parameters, follow these steps: 1. Open Command Prompt or PowerShell as per your case (as administrator). 2. Navigate to the directory where the Windows 11 setup executable is located (e.g., type command prompt cd c:\Win11). 3. Run the following command:
```
.\setup.exe /auto upgrade /dynamicupdate disable /migratedrivers none
```
Explanation of parameters:

• `/auto`: Automatically upgrades the existing Windows installation.
  
• `/dynamicupdate`: Disables dynamic updates during the upgrade process.
  
• `/migratedrivers`: Does not migrate drivers during the upgrade.
  

Make sure to run this command with administrative privileges and follow any prompts that appear during the upgrade process.

Hi all, I was gifted a custom built PC about 4 years ago and it worked great at the time with mostly refurbished parts, until about a year and a half ago my ex boyfriend downloaded a virus (and effectively destroyed) my PC. We boiled it down to a corrupted hard drive and a shorted motherboard. I replaced the motherboard and hard drive and still was facing crashes, namely during Valorant. When playing the game, it would show a muted green screen with no error messsages or text like a blue screen would.
It happened repeatedly and I figured it was the graphics card. I upgraded to a Radeon 6650 xt, nothing special, and when I played Val it would say the drivers timed out (amd crash reporter would pull up). So my next logical step was to upgrade the power supply from a 500W to a 750W. I know this all seems ridiculous, but I know so little about computers and was never told the specs of the original state of the PC. Now, I'm having the same exact issue still, except it's happening later into playing the game. The only other game this happened during was Pico Park, but everything went smooth for The Binding Of Isaac and for Apex Legends. It functions for Internet related work, just struggling in the gaming aspect. To confirm, it still sometimes does the green screen as well as the regular driver crash. Drivers are up to date. Is all hope lost?
Here's my current specs:
GPU: Radeon 6650 xt CPU: Ryzen 5 2600 PSU: Corsair 750W
If I left anything out let me know. Thanks for any and all help in advanced :)

Okay so I've been dealing with this problem when I started up a new save on Ashlands.
I used to play just fine without any issues, however, three major things changed between then and now:

1. I downloaded mods
   
2. I got a new Graphics card
   
3. Ashlands came out.
   

For the first issue: I made sure to delete Valheim, and then remove any loose files hanging around in it's directory. This didn't solve the problem.
For the second change: I downloaded all drivers prompted by Nvidia, and am currently up to date. I also ensured using afterburner that my clock speeds are default.
For the third, I don't believe Ashlands is the problem because my brother had this card before me, and he had many crashing issues as well. I asked him about it, but he had no idea what he could've done to fix it on his end or if the fixes worked long term, because he didn't play the game for long.
More information:

1. My player log crash has the "Attempt to access invalid address." Error.

2.Running as administrator and making everything about Valheim the highest priority I could make it.

1. I have gotten Valheim to run a couple of times using other solutions. During this period of the game working, I can play the game, return to the menu, select different worlds, make new ones, save, even restart the game. However, upon restarting my computer, it breaks again, and those previous solutions have all finally stopped working today, these solutions include:

.Deleting registry files under Irongate > Valheim
.Validating game files in steam
.Reinstalling the game in steam
.Turning off all but vital programs
.Making sure Overwolf was off at all times
.adding "-window-mode exclusive -screen-fullscreen" to steam launch options
.adding "gfx-enable-gfx-jobs=1 and gfx-enable-native-gfx-jobs=1 to the boot.config file
.using nvidea control panel to force Vsync
Today I finally can't launch the game no mater what I do, so I'm finally coming here to ask for help. My specs:
Windows 10 Ryzen 5 2600x six core CPU 2x8GB dual channel 1064MHz ram ASUSTek PRIME B350M-A MOBO NVIDIA 2060 SUPER GPU Game and steam both stored on a generic 1tb harddrive
If anyone could find or provide me with a list of programs that Unity hates, that would help me a ton. I don't have any of the usual suspects I've seen mentioned before.

Just like those books, How to install windows 11 and BIOS, drivers and utility, etc. for dummies.
I'm COMPLETELY new to everything PC, I might as well be like your mom trying to use a new smartphone lol Wanted to get a detailed thread for all the noobies trying to build and install new PCs. So...
1. Do I install BIOS or windows 11 1st.
2. Can I put my windows 11 media creation tool on the same USB as my BIOS & Driver updates? (All of these items should be downloaded on my current already working PC correct? & Windows MUST be downloaded 1st as it will re-format the stick, then I can copy and paste my bios/driver downloads onto the stick. OR... should I download new BIOS update onto new PC then reformat the USB to put windows on. Is there anything important I should know about this process for someone going into it blind?
3. Can I download the main BIOS on old PC and then download the rest of the utilities/drivers once windows and the internet is installed on the new PC? EX: Download latest version BIOS update, install BIOS update onto new PC, restart new PC, remove stick, now Download OS, then download remaining mobo drivers/utilities from old PC onto new PC. OR... Should I put the BIOS update AND the drivers updates (chipset, graphics, realtek, lan) on the same USB as the 1st BIOS version update. & how would I download those. (Obv. need to download those in order to even access internet on new PC to even download rest of them)
Does anyone have a very good detailed video on how to do all this correctly? I have 4 different videos and they say different things or leave out important details or steps which started to confuse me.
Motherboard is MSI B650 gaming plus wifi / 7600x3d

🇺🇲The only sports betting app that actually gives you a FREE $10 to bet with without requiring a deposit🧙‍♂️👻
🇺🇲Only available in AK, CA, DC, FL, GA, IL, KS, KY, MN, NE, NM, NC, ND, OK, OR, RI, SC, SD, TX, UT, WI.
🕹If you bet correctly you can withdraw your winnings!
🎮Just make sure and use my code during registration: DRAGO78 CREDITS INSTANTLY‼️
🫠Go to Google/Apple Play and DOWNLOAD "Dabble"
🚘Enter my code: DRAGO78
〽️ Place your first bet! 1x playthrough, then cash out to bank

Hello, I am trying to get stretched resolution use adrenaline but there are a lot of issues. First off I have a ultra wide monitor (5120 x 1440) and it is 240 hz. On my G.Pixel Clock the value is set to "1941427.2" and there is a red exclamation mark. I've looked online but I havent found a good fix. I found a post saying I need to install a fix driver but I dont trust a 3rd party driver download. Is there a way to fix this without any 3rd party applications. I found another fix saying use CVT RB but when I try it just says clear all the errors first.

Hi all, I have just finished building a brand new PC - all new components. Not my first build, but I am also not an expert.
​
- ASRock B650M PG Lightning WIFI
- Ryzen 5 7600
- Corsair Vengeance 32GB 6000/CL30 RAM
- Silicon Power UD90 SSD
- Coolermaster 750 Gold PSU
- ASUS TUF RX 7800 XT
​
I am having issues after installing windows as the display will lose signal and never regain it. I get a similar issue with either the 7800XT or the Ryzen 5 7600's iGPU. To simplify things, I am putting the 7800XT to the side and focusing on first getting things working with the iGPU alone. I have narrowed it down to a consistent issue that I can recreate as follows:
​

1. I do a fresh install of Windows via a flash drive.
   
2. I let Windows launch with no ethernet connected. Everything is initially fine while offline, I’ve let it sit there for over an hour with no issues.
   
3. It seems as though as soon as drivers start to install, my display monitor loses signal. I have installed (or let Windows install) drivers the following ways:
   

3.1 Manually installing the motherboard drivers from ASRock’s website. The chipset driver installed ok, but I lost signal during the VGA driver install.
3.2 Plugging in ethernet and doing nothing. I think something is downloading/installing some drivers in the background. Within 5 mins of plugging in ethernet, I lose signal.
3.3 Plugging in ethernet and doing the ASRock Auto Driver Install tool that pops up.
3.3 Plugging in ethernet and quickly downloading/Installing AMD’s Auto Detect driver software and letting it do the Factory Install (supposedly pauses windows updates).
3.4 Plugging in ethernet and doing my Windows Updates.

1. Consistently, within a few moments of any of these actions, I will lose signal to the monitor. The PC remains on. Once I lose signal, I cannot regain it despite rebooting or changing monitors. I’ve waited for 30mins to see if it comes back, which it does not. From here on, the display is only available for BIOS until I do a fresh install if Windows again.

​
A few more details:
- BIOS is up to date (one of the first things I did), and I am using BIOS defaults for everything.
- I have tried CMOS resetting by removing the battery with it unplugged for 15 minutes
- I have tried this with Windows 11 and Windows 10
- I have confirmed the Monitor and HDMI cables work on other machines.
- I have confirmed tried using both sticks of RAM, one stick of RAM (each), in different slots, etc. A check in the BIOS always confirms it is showing up correctly.
- I have confirmed the CPU is installed correctly and running at like 47C in BIOS always.
- I have confirmed the SSD works in a different PC.
- I have removed everything from the board and re-seated everything multiple times (including in the PSU itself).
- I have tried this with as few things plugged into the board as possible (power switches, CPU and 24Pin connectors, and CPU fan only pretty much)
- I have tried putting the 7800 XT in and I get the same issue is consistently.
- The only way I can get past the initial 5ish minutes of having ethernet plugged in is if I install my old GTX970, which seems to work fine. The problem only occurs if I am on the Ryzen 5 7600 iGPU or the new 7800XT. The fact that I can use the PC in this configuration suggest to me that the SSD, RAM, and PSU are all working fine (but not an expert).
- Another (possibly related?) issue is that I put the RX 7800XT into my old PC and it worked fine initially. No display signal loss for 20+ minutes, even when connected to the internet. However, as soon as I ran the AMD Auto-Detect Driver tool, I lost signal in that PC too.
​
Very unsure where to go from here after 20+ hours of troubleshooting and reinstalling windows dozens of times. My feeling is that there's something wrong with the board, CPU and/or GPU. I just don't know exactly what and where. Please let me know if you have any suggestions. Thanks!